Chapter 2
Installing and Configuring
Installing Additional System Memory
48
Installing Additional System Memory
Your system has 12 memory sockets for installing DDR SDRAM memory modules. System memory DIMMs
are located on the system board.
WARNING Ensure that the system is powered-down and all power sources have been
disconnected from the server prior to removing or replacing system memory.
Voltages are present at various locations within the server whenever an AC power
source is connected. This voltage is present even when the main power switch is in
the off position.
Failure to observe this warning could result in personal injury or damage to
equipment.
CAUTION Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to the server.
To Next Page
Loading...
