HP 9000 rp3440 - Supported DIMM Sizes; Figure 2-33. DIMM Slot Identification

Chapter 2
Installing and Configuring
Installing Additional System Memory
49
Supported DIMM Sizes
Supported DIMM sizes are 256 MB, 512 MB, 1 GB, 2 GB (HP 9000 rp3440 only), and 4 GB (HP 9000 rp3440
only). If 4 GB DIMMs are used (HP 9000 rp3440), only one configuration (8 X 4 GB in the first eight sockets)
is supported. Dissimilar DIMM sizes may be used across the entire system board (except when 4 GB DIMMs
are used) but both DIMMs in a pair (first group of four, connectors 0A and 0B of HP 9000 rp3410) and all four
DIMMs of any quad must be identical.
Figure 2-33 DIMM Slot Identification
Rear
Front
Pair 3 (2A &
Pair 2 (1A&1B)
1A
1B
3A
3B
Pair 6 (5A&5B)
Pair 1
2A
0B
2B
0
Cell 1
Cell 0
4B
5B
5A
4A
Pair 5
Pair 4 (3A&3B)
Quad 1 = Pair 1 & Pair 2
Quad 2 = Pair 3 & Pair 4
Quad 3 = Pair 5 & Pair 6