HP 9000 rp3440 - Core I;O Connections

Cable Connections
Core I/O Connections
Chapter 4
80
Core I/O Connections
Each HP 9000 rp3410 and HP 9000 rp3440 server core I/O includes:
• Four USB ports
• Two 9-pin serial ports (Console A and Serial B—factory use only)
• One Management Processor (MP) I/O interface
— One 10/100 management LAN-RJ45
— One 25-pin serial, console/remote/UPS
• LVD/SE SCSI port—available on rp3440 server only
— The SCSI HBA board is required to attach SCSI external mass storage to the system
• LAN connection
— One 10/100/1000 LAN—RJ45
• One 15-pin VGA port—this port is currently disabled. DO NOT USE THIS PORT. For graphics capability
install the accessory graphics PCI card, P/N A6150