HP 9000 rp4440 - Accessing a Rackless Server; Figure 4-2 Rackless Hp 9000 Rp4440 Server

Chapter 4
Removing and Replacing Components
Accessing a Rackless Server
37
Accessing a Rackless Server
The hp 9000 rp4440 Server is also designed to be rackless. You do not need to remove the tubular stand from
the HP Server to gain access to internal components. The front bezel, front cover, and top cover may be
removed with the tubular stand attached to the HP Server.
WARNING Ensure that the HP Server is properly grounded when performing
remove-and-replace procedures. Use an antistatic wrist strap and grounding mat
similar to those found in the HP Electrically Conductive Field Service Kit.
Figure 4-2 Rackless hp 9000 rp4440 Server