17
Printing Basics: Automatic Two-Sided Printing
Printing with the Automatic Two-Sided Printing Module
Not all paper weights and sizes and paper types can be used with
the Automatic Two-Sided Printing Module. You can print on plain
paper, HP Bright White Inkjet Paper, HP Premium Inkjet
Heavyweight Paper, HP Felt-textured Greeting Card Paper, HP
Professional Brochure Paper, Glossy or Matte, and HP Photo
Quality InkJet Paper, Semi-gloss or Matte.
To use the Automatic Two-Sided Printing Module:
1 Load appropriate paper.
2 From the File menu, select Page Setup.
3Check the Two Sided Safe Margins box, then click OK.
4 From the File menu, select Print.
5 Choose Layout from the General pop-up menu. See “Print
Dialog Box” on page 9 for instructions.
6In the Layout dialog box, check the Print Both Sides box, and
select Automatic.
7 Click on either the Book or Tablet icon to choose the correct
page orientation.
8 Make any other formatting selections from other Print dialog
boxes, then click Print.
Note:
After one side of the page is printed on, the paper is held
while the ink dries. Once the ink is dry, the paper is pulled back in,
and the reverse side is printed. As each page is finished, the page
will drop into the OUT tray. If you have problems with Two-Sided
Printing, see “Troubleshooting Tips” beginning on page 43.
To Next Page
Loading...
