HP 9x9KS Series Installation And Service Manual

Gener2, 1 Information
Although a complete INP subsystem must include one or more
!NP-to-modem cables, INP-to-INP direct-connect cables, or
INP-to-SSLC direct-connect cables, these cables are not includeJ
under the HP 30010A product number. Each interconnecting cable
or set of cables required for the various configurations is
ocrleced separately under its own product numbe~o See table 1-1
for a list of the available cables.
The followin9
ope t~ a t ion of
CAUTION
Use of the longer lengths of the
external interconnect cables
requires special precautions. Long
cables are very susceptible to
induced transients. DO NOT run
cables outdoors or near electrically
"noisy" equipment.
test equipment
the INP while
is used to verify
troubleshooting the
munications network:
• Cable test connector.
o Board test hood.
the proper
data com-
These items of test equipment are supplied by the HP Customer
1
Engineer (contained in Product Support Package 30010-67801).
Different part numbers of test connectors and test hoods are
required for different cable connection configurations. Table
1-2 shows which test items are compatible with each set of inter-
connecting cables.
JUN 1980
1-3

HP 9x9KS Series Specifications

General

Brand	HP
Model	9x9KS Series
Category	Desktop
Language	English