HP Alletra 4120 - System Board Components

ItemItem DescriptionDescription StatusStatus
1 UID LED Solid blue = Activated
Flashing blue:
1 flash per second = Remote management or firmware upgrade in progress
4 flashes per second = iLO manual reboot sequence initiated
8 flashes per second = iLO manual reboot sequence in progress
Off = Deactivated
2 Power supply LED (bay 2) Solid green = Normal
Off = One or more of the following conditions exists:
Power is unavailable.
Power supply failed
Power supply is in standby mode.
Power supply error
2 Power supply LED (bay 1) Solid green = Normal
Off = One or more of the following conditions exists:
Power is unavailable.
Power supply failed
Power supply is in standby mode.
Power supply error
Not
shown
iLO port 1 link LED Green = Network link
Off = No network link
Not
shown
iLO port 1 activity LED Solid green = Link to network
Flashing green = Network active
Off = No network activity
System board componentsSystem board components
HPE Alletra Storage Server 4120 Setup and Installation Guide 8