HP ap5000 - All-in-One Point of Sale System - Removing the Bottom I;O Cover; Replacing the Bottom I;O Cover

Removing the Bottom I/O Cover
To remove the bottom I/O cover, press downward on the two tabs at the top of the cover (1) and rotate
the cover off (2).
Figure 2-1 Removing the Bottom I/O Cover
Replacing the Bottom I/O Cover
To replace the bottom I/O cover, insert the bottom of the cover (1) and rotate the top of the cover on so
that it snaps in place (2).
Figure 2-2 Replacing the Bottom I/O Cover
6 Chapter 2 Hardware Upgrades ENWW