HP ap5000 - All-in-One Point of Sale System - Using the Print Advertising Panel

Using the Print Advertising Panel
You can insert a print advertisement into the panel on the system's base. A print advertisement template
is available on the system's hard drive.
1. Press inward on the two sides of the advertising panel (1) and pull the cover of the panel off the
system's base (2).
Figure 2-10 Removing the Print Advertisement Panel Cover
2. Insert a print advertisement behind the panel cover.
NOTE: A print advertisement panel template is available on the system's hard drive. In Windows
XP or Windows Embedded POSReady 2009, select Start > All Programs > HP Point of Sale
Information to access the template. In Windows 7, select Start > HP Point of Sale Information
to access the template.
3. Replace the panel cover by pressing it straight onto the base.
Figure 2-11 Replacing the Print Advertisement Panel Cover
ENWW Using the Print Advertising Panel 11