HP ap5000 - All-in-One Point of Sale System - Installing an Hp;Kensington Microsaver Security Cable Lock

Installing an HP/Kensington MicroSaver Security Cable
Lock
1. Remove the bottom I/O cover (see Removing the Bottom I/O Cover on page 6).
2. Install the cable lock into the lock slot on the bottom I/O panel.
Figure 2-12 Installing an HP/Kensington MicroSaver Security Cable Lock
3. Replace the bottom I/O cover (see Replacing the Bottom I/O Cover on page 6).
12 Chapter 2 Hardware Upgrades ENWW