NOTE: If an error message is displayed, you might need to run the Chrome Recovery Utility again or use a
dierent USB ash drive or SD memory card.
4. When the “System Recovery is complete” message is displayed, remove the recovery media.
The computer restarts with Chrome OS reinstalled.
Setting up your computer after a reset or recovery
After a reset or recovery is complete, perform the initial setup process. For details about setting up
the computer, go to http://www.support.google.com.
Erase and reformat the recovery media
During the process of creating recovery media, the USB ash drive or SD memory card is formatted as a recovery
tool. After you recover your computer, you must erase the recovery media if you want to reuse your USB ash
drive or SD memory card to store other les. Use the steps in this section to erase the recovery media using
the Chromebook Recovery Utility.
1. Click the Launcher icon, and then click All Apps.
2. In the apps window, click Recovery.
3. Click the Settings icon, and then click Erase recovery media.
4. Select the USB ash drive or SD memory card that you inserted, click Continue, and then click Erase now.
5. After the recovery media is erased, click Done to close the Chromebook Recovery Utility, and then remove
the USB ash drive or SD memory card.
The media is ready to be formatted using a formatting tool provided by your operating system.
Setting up your computer after a reset or recovery 55
To Next Page
Loading...
