Hard drive and Serial Advanced Technology Attachment (SATA) cable
Before proceeding, remove the following components:
●
Formatter PCA. See
Formatter PCA on page 192.
Remove the hard drive and SATA cable
CAUTION: ESD sensitive component.
1. Disconnect one connector.
CAUTION: Use your finger to secure the connector base to the PCA. The connector base can
be dislodged and damaged when the connector is removed.
Figure 6-17 Remove the hard drive and SATA cable (1 of 3)
ENWW Customer self repair (CSR) components 195
To Next Page
Loading...
