Part number Description Table and page
* HOLDER, PAD Tray 3 input tray (cassette)
on page 203
* SPRING, COMPRESSION Tray 3 input tray (cassette)
on page 203
* GUIDE, REGISTRATION Paper pickup feeder
assembly (Tray 3) on page 207
* PLATE, REG. GROUNDING, 1 Paper pickup feeder
assembly (Tray 3) on page 207
* PLATE, REG. GROUNDING, 2 Paper pickup feeder
assembly (Tray 3) on page 207
* COVER, PICKUP FEED FRAME Paper pickup feeder
assembly (Tray 3) on page 207
* GUIDE, PRE-TRANSFER Paper pickup feeder
assembly (Tray 3) on page 207
* ROLLER, REGISTRATION DRIVE Paper pickup feeder
assembly (Tray 3) on page 207
* BUSHING Paper pickup feeder
assembly (Tray 3) on page 207
* ROLLER, REGISTRATION, A Paper pickup feeder
assembly (Tray 3) on page 207
* ROLLER, REGISTRATION, B Paper pickup feeder
assembly (Tray 3) on page 207
* ROLLER, REGISTRATION, C Paper pickup feeder
assembly (Tray 3) on page 207
* BUSHING Paper pickup feeder
assembly (Tray 3) on page 207
* BUSHING Paper pickup feeder
assembly (Tray 3) on page 207
* RESISTOR, 400 OHM, 0.5W Paper pickup feeder
assembly (Tray 3) on page 207
* SPRING, TENSION Paper pickup feeder
assembly (Tray 3) on page 207
* PHOTO INTERRUPTER (SENSOR) Paper pickup feeder
assembly (Tray 3) on page 207
* CABLE, OPTION SENSOR Paper pickup feeder
assembly (Tray 3) on page 207
* PAPER PICKUP DRIVE ASS'Y Paper pickup feeder
assembly (Tray 3) on page 207
* SCREW, TAPPING,TRUSS HEAD,M4X8 Paper pickup feeder
assembly (Tray 3) on page 207
* FRAME, PAPER PICKUP FEEDER Paper pickup feeder
assembly (Tray 3) on page 207
* SHAFT, REGISTRATION ROLLER Paper pickup feeder
assembly (Tray 3) on page 207
Table 7-23 Numerical parts list (continued)
ENWW Numerical parts list 265
To Next Page
Loading...
