HP color laserJet 4550 series - Page 278

276 Troubleshooting C7085-90921
Configuration Menu
The Configuration Menu is used to set general printer default settings.
CAUTION Hewlett-Packard recommends that configuration settings only be changed by a system administrator.
Configuration settings seldom need to be changed.
*Denotes default setting
Table 7-15 HP Color LaserJet 4500 Configuration settings
Menu item Values Description
POWERSAVE OFF
1 MIN (used for
troubleshooting)
30 MIN
1 HR*
2 HRS
4 HRS
8 HRS
The length of time before the printer
goes into power-saving mode.
PERSONALITY AUTO*
PCL
PS
The personality (language) the
printer uses to process a print job.
CLEARABLE
WARNINGS
JOB*
ON
If ON, message appears until [Go] is
pressed. If JOB, message appears
until end of print job.
AUTO CONTINUE ON*
OFF
Determines whether the printer
continues printing when certain
errors occur. If ON, printer returns to
the READY state. If OFF, printer
remains offline until [Go] is pressed.
TONER LOW CONTINUE*
STOP
Determines whether the printer
continues or stops printing when a
TONER LOW condition is detected.
JAM RECOVERY OFF*
ON
Printer attempts to recover from
jams and reprints affected pages.
PRINT PS ERRORS OFF*
ON
Prints out an error page when
emulated PostScript errors occur.