HP color laserJet 4550 series - Page 281

C7085-90921 Chapter 7 Troubleshooting 279
*Denotes default setting
1
Only appears when a fixed space font is specified
2
Only appears when a proportional space font is specified
Table 7-18 HP Color LaserJet 4550 Printing Menu settings
Menu Item Values Description
COPIES 1 to 999 (default:1) Number of copies.
UNIT OF MEASURE INCHES
MM
Set the unit of measurement.
X DIMENSION Determine the length of the
custom size media.
Y DIMENSION Determine the width of the
custom size media.
ORIENTATION PORTRAIT*
LANDSCAPE
Determines the default page
orientation.
PCL FONT SOURCE INTERNAL*
SOFT
SLOT n (n = 1,2,3)
Instructs the printer where to
look for PCL fonts.
PCL FONT NUMBER 0 to 999 (default: 0) Specifies a default PCL font
number.
PCL FONT PITCH
1
0.44 to 99.99
(default: 10)
Specifies a default pitch for
PCL fonts.
PCL FONT
POINT SIZE
2
4 to 999.75
(default: 12)
Specifies a default font size
for PCL fonts.
PCL SYMBOL SET PC-8 (default) Used to select an appropriate
symbol set.
WIDE A4 NO*
YES
Sets the printer to allow side-
A4 type media.
APPEND CR TO LF NO*
YES
Appends a carriage return to
each line feed character in
the data stream. (UNIX)