64 Installation and configuration C7085-90921
Connecting to a network
The following ports are available on the HP JetDirect print servers:
1 LocalTalk DIN-8 port (not available on the HP JetDirect J3113A
print server)
2 BNC port for ThinLAN coaxial cable (not available on the HP
JetDirect J3113A print server
3 RJ-45 port
Note
On the HP JetDirect J3113A print server, you can attach either a
ThinLAN cable or a 10Base-T cable, but not both at the same time.
See the instructions that follow to connect one or more network cables
to the printer.
Connecting to a LocalTalk network (J3111A
only)
Plug the end of your DIN-8 cable into the LocalTalk port on the HP
JetDirect print server. Attach the other end to the network.
Note
Network cables are not included with the printer. They must be
purchased separately.
Network cable connection
1
2
3
LocalTalk DIN-8 connection
To Next Page
Loading...