HP Color LaserJet 4700 - Page 189

13 Press to highlight PROCESS CLEANING PAGE.
14 Press
to select PROCESS CLEANING PAGE.
Cleaning the HP Color LaserJet 4700dn, HP Color LaserJet 4700dtn, and HP Color LaserJet
4700ph+ printers at the control panel
1 Press M
ENU to enter the MENUS.
2 Press
to highlight CONFIGURE DEVICE.
3 Press
to select CONFIGURE DEVICE.
4 Press
to highlight PRINT QUALITY.
5 Press
to select PRINT QUALITY.
6 Press
to highlight PROCESS CLEANING PAGE.
7 Press
to select PROCESS CLEANING PAGE.
A page with a pattern prints.
Setting auto cleaning
The AUTO CLEANING menu option allows you to turn auto cleaning on or off. When auto cleaning
is turned on, the printer prints a cleaning page when the page count reaches the value set in the
cleaning interval. If auto cleaning is set to Off, the cleaning interval is not shown. The default value
for auto cleaning is Off.
1 Press M
ENU to enter the MENUS.
2 Press
to highlight CONFIGURE DEVICE.
3 Press
to select CONFIGURE DEVICE.
4 Press
to highlight PRINT QUALITY.
5 Press
to select PRINT QUALITY.
6 Press
to highlight AUTO CLEANING.
7 Press
to select AUTO CLEANING.
8 Press
to highlight the desired value.
9 Press
to select the desired value.
Setting the cleaning interval
The CLEANING INTERVAL menu option allows you to set the interval at which the auto cleaning is
due for the printer. The cleaning interval can be set anywhere from 1,000 to 20,000 pages.
1 Press M
ENU to enter the MENUS.
2 Press
to highlight CONFIGURE DEVICE.
3 Press
to select CONFIGURE DEVICE.
4 Press
to highlight PRINT QUALITY.
ENWW Using the cleaning page 173