6. If other users can print, are they using the same network operating system?
Check your system for the correct network operating system setup.
7. Is your protocol enabled?
Check the status of your protocol on the configuration report. You can also use the embedded Web
server, HP ToolboxFX, or Macintosh Configure Device to check the status of other protocols.
8. Does the product appear in HP Web Jetadmin or other management programs?
●
Verify the network settings on the network configuration page.
●
Confirm the network settings for the product by using the control panel.
ENWW Solve connectivity problems 201
To Next Page
Loading...