Menu item Sub-menu item Sub-menu item Description
Calibration mode: Determines the type
of calibration that the product uses during
the calibration process.
●
Normal: The standard Calibration
mode setting.
●
Full: The extended Calibration
mode setting (this calibration takes
longer).
Replace Supplies Override out
Stop at out
Override out: If the product determines
that a print cartridge has reached the end
of its life, you can continue printing until
you notice a decrease in print quality.
Stop at out: If the product determines
that a print cartridge has reached the end
of its life, you must replace the cartridge
before printing can continue. This is the
default setting.
Cartridge low (1-20) The percentage threshold determines
when the product begins reporting low
toner. The message is either reported on
the control-panel display or using the
toner LED, if it exists. The default setting
is 10%.
Restrict color Enable color
Disable color
Select Enable color to allow the job to
print in either monochrome (black and
white) or color, depending on the
specifications of the job.
Select Disable color to disable color
printing. All jobs will print in monochrome
(black and white).
Courier font Regular
Dark
Selects a version of the Courier font. The
default is Regular.
Display contrast Medium
Darker
Darkest
Lightest
Lighter
Select the level of contrast for the display.
The default setting is Medium.
24 Chapter 2 Control panel ENWW
To Next Page
Loading...