Work with memory
Product memory (HP Color LaserJet CP1510 Series Printer only)
The HP Color LaserJet CP1510 Series Printer has one dual inline memory module (DIMM) slot. Use
the DIMM slot to upgrade the product with the following items:
●
More product memory (DIMMs are available in 64, 128, and 256 MB)
●
Other DIMM-based printer languages and product options
You might want to increase product memory if you often print complex graphics or HP postscript level 3
emulation documents, or if you use many downloaded fonts. Additional memory also enables multiple
collated copies to print at the maximum speed.
Before ordering additional memory, see how much memory is currently installed by printing a
Configuration page. See
Print information pages on page 36.
Install memory DIMMs
You can install more memory for the product, or you can install a font DIMM to allow the product to print
characters (for example, Chinese language or the Cyrillic alphabet characters).
CAUTION: Static electricity can damage DIMMs. When handling DIMMs, either wear an antistatic
wrist strap, or frequently touch the surface of the DIMM antistatic package, and then touch bare metal
on the product.
Install memory and font DIMMs
1. Turn the product off, and then disconnect all power and interface cables.
2. On the right side of the product, open the DIMM access door.
3. To replace a DIMM that is currently installed, spread the latches apart on each side of the DIMM
slot, lift the DIMM up at an angle, and pull it out.
66 Chapter 4 Manage and maintain ENWW
To Next Page
Loading...