Define custom copy settings
You can use the Administration menu to establish default settings that apply to all copy jobs. If
necessary, you can override most settings for an individual job. After that job is complete, the product
returns to the default settings.
1. From the Home screen, scroll to and touch the Administration menu.
2. Open the Copy Settings menu.
3. Several options are available. You can configure defaults for all options, or for only some options.
NOTE: To learn about each menu option, touch the Help button in the upper-right corner of
the screen for that option.
Set the paper size and type for copying on special paper
1. From the Home screen, touch the Copy button.
2. Touch the Paper Selection button.
3. Select the tray that holds the paper that you
want to use, and then touch the OK button.
ENWW
Copy settings
183
To Next Page
Loading...
