Setup
Introduction
The HP LaserJet Analog Fax Accessory 500 enables the HP multifunction product (MFP) to function as a
standalone analog fax machine. For more information, see
www.hp.com/go/
ljanalogfaxaccessory500_manuals.
NOTE: In addition to the analog fax feature, the product also supports LAN and internet faxing. Only
one fax method can be enabled at a time.
NOTE: If the product came with the fax accessory installed, remove the fax connection cover, connect
the phone cord, and then perform the initial fax configuration. The fax connection cover is located on
the phone connector on the formatter rear panel.
HP LaserJet Analog Fax Accessory 500 features
Send-fax features
●
Speed dials
●
Fax address book
●
Resolution and image-adjustment options
●
Billing codes
206 Chapter 12 Fax ENWW
To Next Page
Loading...
