Software installation
Network installation
Use a network connection to connect multiple computers to the product.
Configure the IP address
1. Connect the network cable to the product and the network port.
2. Wait for 60 seconds before continuing. During this time, the network recognizes the product
and assigns an IP address or hostname for the product.
3. At the product control panel, press the Home button
.
4. Press the down arrow
to highlight the INFORMATION menu, and then press the OK button.
5. Press the down arrow
to highlight the PRINT CONFIGURATION menu, and then press the
OK button.
ENWW Network installation 1
EN
3
To Next Page
Loading...
