2
Example: If the domain name is HP.com, Device email address would be “device@hp.com”
e) Click Apply.
2. After setting the SMTP server details:
a) Navigate to Settings > AutoSend.
b) Select Enable AutoSend and configure to send every 1 day (as shown below).
c) Provide the destination email address: meterinfo_XX@clearingoffice.com. Replace the
“XX” (as shown here) with the 2-letter code for your country-specific email address. To
find the country-specific code, please refer to the table of email addresses at the end of
this document.
d) Click Apply.
To Next Page
Loading...
