9. The stapler/stacker feed motor starts rotating while the jogger motor is reversed and the jogger guide
moves to its home position.
Figure 1-68 Stapling mailbox stapler operation (4 of 4)
Paddle motor
Output bin 3 upper delivery roller
Output bin 3 lower delivery roller
M4
Stapler/Stacker feed motor
M5
Output bin 3
SR3
Output bin 3 media full sensor
M3
Jogger guide
Jogger motor
M6
PS2602
Stapler/Stacker lifter motor
Output bin 3 lower limit sensor
The output bin 3 media full sensor on output bin 3 detects whether the bin is full. The stapler/stacker
controller determines that the media stack surface is high and reverses the stapler/stacker lifter motor
to lower output bin 3 when the output bin 3 media full sensor is on for a specified period. If the output
bin 3 lower limit sensor is turned on at this time, the stapler/stacker controller determines an output
bin 3 media full and notifies the formatter through the DC controller.
The stapler/stacker controller determines a jogger motor failure and notifies the formatter through the
DC controller when it does not detect the jogger sensor for a specified period after the jogger motor
starts rotating.
ENWW Stapling mailbox (M680) 93
To Next Page
Loading...