EasyManua.ls Logo

HP Color LaserJet Enterprise MFP M680 series - Page 137

HP Color LaserJet Enterprise MFP M680 series
568 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 2-6 Pre-boot menu options (6 of 7)
Menu option First level Second level Third level Description
Administrator
(continued)
Diagnostics Diagnostic items are useful to diagnose hardware components
and their interface connections. Use these items to
troubleshoot specific hardware components, and the interface
between them and other components.
Memory Do Not Run Use the Do Not Run item to exclude the Memory diagnostic
when executing multiple diagnostics.
Short Use the Short item to select a brief memory test.
NOTE: This test requires about four minutes to execute.
Long Use the Long item to select an extended memory test.
NOTE: This test requires about twenty minutes to execute.
Disk Do Not Run Use the Do Not Run item to exclude the Disk diagnostic when
executing multiple diagnostics.
Short Use the Short item to select a brief firmware self-test.
NOTE: This test requires about two or three minutes to
execute.
Long Use the Long item to select an extended firmware self-test.
NOTE: This test requires about sixty minutes to execute.
Optimized Use the Optimized item to select a test that checks the active
sectors on the disk.
NOTE: This test requires about thirty minutes to execute.
Raw Use the Raw item to select a test that checks every sector on
the disk.
NOTE: This test requires about fifty minutes to execute.
Smart Use the Smart item to select a very brief test that checks the
drive self-monitoring analysis and reporting technology
(SMART) status—the drive detects and reports reliability
indicators to help anticipate disk failures (SMART status).
ICB Connection Use the ICB item to select a test that checks the communication
between the formatter and interconnect board (ICB).
CPB Use the CPB item to verify the integrity of the copy processor
board (CPB) and the formatter PCA connections.
Interconnect Use the Interconnect item to verify the integrity of the
interconnect PCA (ICB) and its connections.
Run Selected Select the Run Selected item to execute a selected test.
NOTE: If more than one test is selected, they are executed in
sequence.
ENWW Pre-boot menu options 113

Other manuals for HP Color LaserJet Enterprise MFP M680 series

Related product manuals