HP Color LaserJet Enterprise MFP M680 series - Page 142

3. Use the arrow buttons on the touchscreen to scroll down and highlight the +3:Administrator item, and
then touch the OK button to select it.
Figure 2-4 Select the +3:Administrator item
4. Use the arrow buttons on the touchscreen to scroll down and highlight the +A:Remote Admin item, and
then touch the OK button to select it.
Figure 2-5 Select the +A:Remote Admin item
5. Use the arrow buttons on the touchscreen to scroll down and highlight the 1:Start Telnet item, and
then touch the OK button to select it.
Figure 2-6 Select the 1:Start Telnet item
6. Do one of the following
●
If a connecting message displays briefly, go to step
7.
Figure 2-7 Telnet connecting message
●
If an error message displays, use the steps below to identify the problem.
118 Chapter 2 Solve problems ENWW