Use manual print modes
Try the following manual print modes to see if they solve the image-quality problems.
NOTE: Tray 1 and Tray 2 are optimal for paper pickup when using special paper or media other than 20lb
plain paper. For Tray 1 and Tray 2 the product increases the number of attempts to pickup a page, which
increases the reliability of successfully picking the page from the tray and decreases the possibility of a mis-
pick jam.
HP recommends using Tray 1 or Tray 2 if the product is experiencing excessive or reoccurring jams from trays
other than Tray 1 and Tray 2, or for print jobs that require media other than 20lb plain paper.
Select a manual print mode
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
General Settings
●
Print Quality
●
Adjust Paper Types or Optimize
3. Select a paper type, and then select the mode to adjust.
4. Select a value for the mode, and then touch the Save button.
ENWW Use manual print modes 469
To Next Page
Loading...