Clean the product
Over time, particles of toner and paper accumulate inside the product. This can cause print-quality problems
during printing. Cleaning the product eliminates or reduces these problems.
Clean the paper path and print-cartridge areas every time that the toner cartridge are changed or whenever
print-quality problems occur. As much as possible, keep the product free from dust and debris.
To clean the product exterior, use a soft, water-moistened cloth.
Print a cleaning page
Print a cleaning page to remove dust and excess toner from the fuser if you are having any of the following
problems:
●
Specks of toner are on the printed pages.
●
Toner is smearing on the printed pages.
●
Repeated marks occur on the printed pages.
Use the following procedure to print a cleaning page.
1. From the Home screen on the product control panel, scroll to and touch the Device Maintenance button.
2. Open the following menus:
●
Calibration/Cleaning
●
Cleaning Page
3. Touch the Print button to print the page.
4. The cleaning process can take several minutes. When it is finished, discard the printed page.
ENWW Clean the product 491
To Next Page
Loading...