3. Clean the scanner glass, the document feeder
strips, and the white plastic backing with a soft
cloth or sponge that has been moistened with
nonabrasive glass cleaner.
CAUTION: Do not use abrasives, acetone,
benzene, ammonia, ethyl alcohol, or carbon
tetrachloride on any part of the product; these
can damage the product. Do not place liquids
directly on the glass or platen. They might seep
and damage the product.
NOTE: If the product is experiencing streaks on
copies when using the document feeder, be sure
to clean the small strip of glass on the left side of
the scanner.
TIP: See this English-language video for a
demonstration of how to identify and clean
debris that causes streaks on copies:
www.youtube.com/watch?v=CGn7FJvH8sE.
4. Dry the glass and white plastic parts with a
chamois or a cellulose sponge to prevent
spotting.
5. Connect the power cable to an outlet, and then
press the power button to turn the product on.
ENWW Clean the product 493
To Next Page
Loading...