Firmware upgrades
To download the most recent firmware upgrade for the product, go to:
●
In the US, go to
www.hp.com/support/colorljM651 or www.hp.com/support/colorljMFPM680 . Click
Drivers & Software.
●
Outside the US, follow these steps:
1. Go to
www.hp.com/support.
2. Select the appropriate country/region.
3. Click Drivers & Software.
4. Enter the product name (HP Color LaserJet Enterprise M651and/or HP Color LaserJet Enterprise
MFP M680), and then select Search.
Determine the installed revision of firmware
Print a configuration page to determine the installed revision of firmware.
On the configuration page, look in the section marked Device Information for the firmware datecode and
firmware revision.
Firmware datecode and firmware revision examples
●
20100831 (firmware datecode)
●
103067_104746 (firmware revision)
Perform a firmware upgrade
The firmware bundle is a .bdl file. This file requires an interactive upgrade method. The traditional FTP, LPR
or Port 9100 methods of upgrading are not avaialble. Use one of the following methods to upgrade the
firmware for this product.
HP Embedded Web Server
NOTE: The product should be at the Ready state.
The firmware update might take between 10 or more minutes based on the input/output (I/O) transfer rates
and the time it takes for the product to reinitialize.
1. Open an Internet browser window.
2. Enter the product IP address in the URL line.
3. Select the Firmware Upgrade link from within the Troubleshooting tab.
NOTE: If a warning screen appears, follow the instructions for setting an administrator password from
the Security tab.
4. Browse to the location that the firmware upgrade file was downloaded to, and then select the firmware
file—the file has a .bdl file extension. Select the Install button to perform the upgrade.
NOTE: Do not close the browser window OR interrupt communication until the HP Embedded Web
Server (EWS) displays the confirmation page.
ENWW Firmware upgrades 523
To Next Page
Loading...