Connect and configure the product for fax
●
Connect the product
●
Configure the product
●
Install the HP Fax software (Windows, optional)
Connect the product
The product is an analog device. HP recommends using the product on a dedicated analog telephone line.
NOTE: Some countries/regions might require an adapter for the telephone cable that came with the
product.
1.
Connect the telephone cable to the fax port
on the
product and to the telephone jack on the wall.
2. (Optional) To connect an answering machine or extension
phone, pull down the rubber plug from the telephone port
on the product. Connect another telephone cable to the
telephone port on the product and to the “line in” port on the
answering machine or extension phone.
42 Chapter 6 Fax ENWW
To Next Page
Loading...