Image-formation system
The DC controller controls the image-formation system according to commands from the formatter.
The DC controller controls the internal components of the image scanner system to form the toner image on
the photosensitive drum surface. The toner image is transferred to the paper and fused.
The following are the main components of the image-formation system.
●
Imaging drum
●
Laser scanner assembly
●
Carousel
●
Four toner cartridges
●
ITB
●
ITB drive roller
●
T1 pad
●
ITB cleaning brush
●
ITB cleaning roller
●
T2 roller
●
Fuser film assembly
●
Pressure roller
●
High-voltage power supply
ENWW Image-formation system 11
To Next Page
Loading...