HP Compaq 8710w

667-MHz DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 1024 MB, 2048 MB, 4096 MB
Standard Memory 1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
4096 MB (2048 MB x 2)
4096 MB (4096 x 1)
8192 MB (4096 MB x 2)
Optional Memory
Upgrades
Support for up to 8192 MB of memory with the installation of optional DDR2 SDRAM memory kits. Both
memory slots are user accessible. Please refer to the Hardware and Software Guide for installation
procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in both
memory slots.
Up to Slot 1 Slot 2
1024 MB 1024 MB Empty
2048 MB 1024 MB 1024 MB
4096 MB 2048 MB 2048 MB
8192 MB 4096 MB 4096 MB
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third-party
memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory
speeds, the system will perform at the lower memory speed. Full availability of 8 GB of memory requires Windows Vista Business 64-
bit or Linux. With Windows 32-bit operating systems, the amount of usable memory is dependent upon your configuration, so that
above 3 GB all memory may not be available due to system resource requirements.
Memory Upgrades HP 512-MB (DDR2 667 MHz) SODIMM EM993AA
HP 1024-MB (DDR2 667 MHz) SODIMM EM994AA
HP 2048-MB (DDR2 667 MHz) SODIMM EM995AA
QuickSpecs
HP Compaq 8710w Mobile Workstation
Memory
DA - 12731 North America — Version 17 — July 14, 2008 Page 20