Toner-collection unit
NOTE: The toner-collection unit is designed for a single use. Do not try to empty the toner-collection
unit and reuse it. Doing so could cause toner to spill inside the product and result in reduced print quality.
For recycling information, see the product user guide.
1. Open the front door. Make sure that the door is completely open.
Figure 6-9 Remove the toner-collection unit (1 of 4)
2. Grasp the blue label at the top of the toner-collection unit and remove it from the product.
Reinstallation tip Insert the bottom of the replacement unit into the product first and then push
the top of the unit until it clicks into place. If the toner-collection unit is installed incorrectly, the front
door will not close completely.
Figure 6-10 Remove the toner-collection unit (2 of 4)
ENWW Customer self repair (CSR) components 173
To Next Page
Loading...