Toner-collection sensor
Before proceeding, remove the following components:
●
Toner-collection unit. See
Toner-collection unit on page 173.
●
Left cover. See
Left cover on page 200.
Remove the toner-collection sensor
1. Remove five screws (callout 1), and then remove the sheet-metal plate (callout 2).
Figure 6-89 Remove the toner-collection sensor (1 of 4)
2
1
2. Disconnect one connector (callout 3).
Figure 6-90 Remove the toner-collection sensor (2 of 4)
3
220 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...