Residual-toner-feed motor
Before proceeding, remove the following components:
●
Toner-collection unit. See
Toner-collection unit on page 173.
●
Intermediate transfer belt (ITB). See
Intermediate transfer belt (ITB) on page 188.
●
Left cover. See
Left cover on page 200.
Remove the residual-toner-feed motor
NOTE: Be careful. Do not dislodge the residual-toner collection door when you remove the assembly.
If the door becomes dislodged, see
Reinstall the residual-toner collection door on page 226 to reinstall
it.
1. Release one tab (callout 1) while you support the cover (callout 2).
Figure 6-93 Remove the residual-toner-feed motor (1 of 7)
1
2
222 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...