4. Support the assembly, and then remove two screws (callout 4).
Figure 6-96 Remove the residual-toner-feed motor (4 of 7)
4
5. Be careful. Do not dislodge the residual-toner collection door when you remove the assembly. If
the door becomes dislodged, see
Reinstall the residual-toner collection door on page 226 to
reinstall it.
Figure 6-97 Remove the residual-toner-feed motor (5 of 7)
224 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...