10. Carefully remove the assembly.
CAUTION: The gears, arm, and spring on the assembly are not captive. Use your finger to secure
the arm and spring as you remove the assembly. If the gears, arm, or spring become dislodged,
see
Reinstall the cassette-pickup drive assembly on page 261.
Figure 6-153 Remove the cassette-pickup drive assembly (10 of 10)
Reinstall the cassette-pickup drive assembly
1. Make sure that the spring-loaded gear (callout 1) is correctly installed.
Figure 6-154 Reinstall the cassette-pickup drive assembly (1 of 3)
1
ENWW Internal assemblies 261
To Next Page
Loading...