11. Install the main-drive assembly mounting screws, and then reinstall the developing-disengagement
motor (callout 8).
TIP: After reassembling the product, use the DIAGNOSTICS menu to print a COLOR BAND
TEST page.
If the test page shows one or more color planes are not printing (usually in the upper left corner of
the page), the cam or cams for the missing color plane are not correctly aligned. Repeat the reinstall
the main-drive assembly procedure.
Figure 6-210 Reinstall the main-drive assembly (11 of 11)
8
ENWW Internal assemblies 297
To Next Page
Loading...