6. Close the right door and front door to verify that the switches close.
Figure 7-17 Test the right- and front-door interlock switches (3 of 4)
7. Open the right door and front door to verify that the switches open.
Figure 7-18 Test the right- and front-door interlock switches (4 of 4)
8. If the switches do not close, check the connectors on the DC controller PCA.
9. If the switches are opening/closing correctly when either door is open or closed, then check J118
on the DC controller.
10. If the connectors are securely connected to the DC controller PCA and the switches still do not
close, replace the DC controller PCA. See
DC controller PCA and tray on page 240.
ENWW Tools for troubleshooting 333
To Next Page
Loading...