Load trays
You can load different media in the trays and then request media by type or size by using the control
panel.
Paper orientation for loading trays
If you are using paper that requires a specific orientation, load it according to the information in the
following tables.
NOTE: The ALTERNATIVE LETTERHEAD MODE setting affects the way you load letterhead or
preprinted paper. This setting is turned off by default. For more information, see
System setup menu
on page 25.
Tray 1
Paper type Image orientation Duplex mode How to load paper
ALTERNATIVE LETTERHEAD
MODE = Off
How to load paper
ALTERNATIVE LETTERHEAD
MODE = On
Preprinted or
letterhead
Portrait 1-sided printing Face down
Top edge leading into the product
Face up
Bottom edge leading into the
product
2-sided printing Face up
Bottom edge leading into the
product
Face up
Bottom edge leading into the
product
Prepunched Portrait 1- or 2-sided printing Holes toward the back of the
product
Not applicable
50 Chapter 3 Paper and print media ENWW
To Next Page
Loading...