5. The control panel prompts you to set the paper size and type. Select the CUSTOM setting, and
then configure the X and Y dimensions of the custom paper size.
NOTE: See the label in the paper tray, or the following illustration, to determine the X and Y
dimensions.
Y
X
Load 4 x 6 inch (10 x 15 cm) size paper into Tray 3
TIP: To see an animation of this procedure go to this Web site: www.hp.com/go/cljcp3525-load-
tray3-4x6.
Loading paper size 4 x 6 inch (10 x 15 cm) into Tray 3 requires installing the HP postcard media insert.
1. Slide open the tray.
ENWW Load trays 61
To Next Page
Loading...