7. Lift the speaker from the inside of the chassis to remove it.
Figure 8-60 Removing the speaker
To install the speaker, reverse the removal procedures.
Smart Cover Lock
1. Prepare the computer for disassembly (Preparation for Disassembly on page 118).
2. Remove the access panel (
Computer Access Panel on page 125).
3. Remove the power supply to the upright position.
4. Unplug the Smart Cover Lock cable from the system board.
5. Remove the security screw that secures the Smart Cover Lock to the back of the chassis, and then
remove the Smart Cover Lock from the computer.
Figure 8-61 Removing the Smart Cover Lock
To install the Smart Cover Lock, reverse the removal procedure
166 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
To Next Page
Loading...
