HP Designjet 4500 Series - Page 327

8-27
Removal and Installation
HP Designjet 4500 Printer Series Service Manual
Front Panel
Removal
Switch off the product and remove the power cable.
1. Remove the Right Cover
⇒ Page 8-8 .
2. Remove the Rear Door
⇒ Page 8-23.
3. Remove the Right Connector Cover ⇒ Page
8-25.
4. Disconnect the Front Panel Cable from the
Interconnect PCA.
5. Move the Front Panel Cable (including the
ferrite) out of the Electronics Module.