original. Batch copying is useful when you want to copy groups of documents with
the same settings.
1. Prepare the originals that you want to copy with the same settings.
2. Feed the first original into the scanner.
3. Configure the settings in the Copy tab as you would for single-document
copying. See
Copy a document on page 15.
NOTE: If you have original documents with different dimensions, use the
Auto size-detection setting and select Auto width and Auto length.
4. Press the Copy tab.
5. Press the Settings button, select Batch scan, and the press the OK button.
6.
Press the Copy button
, and then begin feeding your original
documents.
20 Chapter 2 Basic Operations
Basic Operations
HP DesignJet Information Engineering
To Next Page
Loading...
