22 Examples of How to Use the Front Panel
5 The options available for the job are listed;
select Reprints and press Enter again.
6 Press the Up key (Δ) to select three
reprints, and then press Enter to set the
number of reprints to 3;
the earlier screen is shown, with available
options.
The reprint is automatically moved to the
front of the queue.
7 Finally, press the Menu key to return to the
top-level menu.
See page 27 for more about Queueing
and Nesting prints.
You can navigate to any of the
settings in the table that starts
on page 6 in a similar way.
To Next Page
Loading...
