tell me about drying time
hp designjet
5500 series
welcome
how do I ...
tell me about ...
the problem is ...
legal notices
glossary
index
With some printing materials and environmental conditions the ink needs
some time to dry before the printing material is unloaded. The following
settings are available.
None: with this setting, the printing material will be released from the
printer as soon as printing has finished. It is the default setting and the
quickest setting, but you must handle the printed image with care, as the
image may not necessarily be ready for use.
Manual: in some cases with this setting the drying time may not be
sufficient, the ink may not be dry, so care is needed when handling the
printing material.
Automatic: the printer automatically determines the appropriate drying
time, based on the printing material you have selected and the current
temperature and humidity. If there is any drying time, a “drying time to go”
countdown will be displayed on the front panel.
see also
drying times with hp tested printing materials
changing the drying time
© 2002 hewlett-packard company
file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0026.htm [8/5/2002 2:38:11 PM]
To Next Page
Loading...