Continuable and Non-Continuable Error Codes 97
System Error Codes
• If the error is not cleared, check all the cables from the failed fan to the PrintMech.
SE Code: 26.00:10 - Contact failure with Magenta Ink Cartridge
Problem Description:
Bad contact detected in ISS slot 0 floater.
Corrective Action:
• Remove the Magenta Ink Cartridge and reinstall it in to the Printer.
• Check the Ink supply tube to this Ink Cartridge has not been forced laterally causing a misalignment
of the floater (Ink supply connector).
• Check the floater spring is functioning correctly.
• Replace the Magenta Ink Cartridge.
• Check that the ISS to Cartridge cable (Magenta Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
• Replace the ISS to Cartridge cable (Magenta Ink Cartridge) ⇒ Page 385.
• Replace the ISS PCA ⇒ Page 391
• Replace the Ink Supply Tubes and Trailing Cable ⇒ Page 380.
SE Code: 26.01:10 - Contact failure with Yellow Ink Cartridge
Problem Description:
Bad contact detected in ISS slot 1 floater.
Corrective Action:
• Remove the Yellow Ink Cartridge and reinstall it in to the Printer.
• Check the Ink supply tube to this Ink Cartridge has not been forced laterally causing a misalignment
of the floater (Ink supply connector).
• Check the floater spring is functioning correctly.
• Replace the Yellow Ink Cartridge.
• Check that the ISS to Cartridge cable (Yellow Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
• Replace the ISS to Cartridge cable (Yellow Ink Cartridge) ⇒ Page 385.
• Replace the ISS PCA ⇒ Page 391
• Replace the Ink Supply Tubes and Trailing Cable ⇒ Page 380.
SE Code: 26.02:10 - Contact failure with Black Ink Cartridge
Problem Description:
Bad contact detected in ISS slot 2 floater.
Corrective Action:
• Remove the Black Ink Cartridge and reinstall it in to the Printer.
• Check the Ink supply tube to this Ink Cartridge has not been forced laterally causing a misalignment
of the floater (Ink supply connector).
To Next Page
Loading...