488 Chapter 8 Removal & Installation
Removal & Installation
Color Sensor Assembly
Removal
1. Open the Window.
2. Remove the Right Cover
⇒
See page 319
.
3. Press the two sides of the Carriage PCA Cover, unclip it
from the Carriage Assembly and remove it.
4. Release the clip and disconnect the Color Sensor cable
from the Carriage PCA.
5. Uncap the Carriage Assembly by manually pulling out
the Printhead Maintenance Cartridge tray.
WARNING!: Switch off the printer and remove the power cable.
To Next Page
Loading...